RWF Elcctro-thermal capactiors

Applications:

Electro-thermal capacitors are used in induction healing systems to improve power factors and back circuit characteristics. RWM an RFM series water cooled film electro-thermal capacitors conforming to the standards JB7110-93 and IEC 6110(1998)

Features:

1. Indoor installed below an elevation of 1000M

2. Installed in the environment without strong mechanical vibration, toxic gas, steam or explosive dust

3. Cooling water temperature not exceeding 30 C and not lower than 6L/min for 1000 KVAR or above products

4. Long time over voltage (not exceeding 4 hours within 24 hours) not exceeding 1.1 u, long time over current not exceeding 1.35 ln

	Model	Rating
	Model	Voltage (KV)	Capacity (Kvar)	Frequency (KHz)	Capacity (UF)	Current (A)
1	RWM0.75-180-0.55	0.75	180	0.5	240	4×25.5
2	RWM0.5-180-1S	0.5	180	1.0	360	4×28.5
3	RWM0.5-180-1SB	0.5	180	1.0	360	114.6(5)
4	RWM0.75-180-1S	0.75	180	1.0	240	4×12.7
5	RWM0.75-180-1SB	0.75	180	1.0	240	50.9(5)
6	RWM0.75-360-1S	0.75	360	1.0	480	4×25.5
7	RWM0.75-360-1SB	0.75	360	1.0	480	101.9(5)
8	RWM1.0-180-1S	1.0	180	1.0	180	4×7.16
9	RWM1.0-180-1SB	1.0	180	1.0	180	28.6(5)
10	RWM1.0-360-1S	1.0	360	1.0	360	4×14.3
11	RWM1.0-360-1SB	1.0	360	1.0	360	57.3(5)
12	RWM0.75-320-2S	0.75	320	2.0	427	4×11.3
13	RWM0.75-500-2S	0.75	500	2.0	667	4×17.7
14	RWM0.375-250-2.5S	0.375	250	2.5	667	4×28.3
15	RWM0.375-250-2.5SB	0.375	250	2.5	667	113.2(5)
16	RWM0.5-250-2.5S	0.5	250	2.5	500	4×15.9
17	RWM0.5-250-2.5SB	0.5	250	2.5	500	63.7(S)
18	RWM0.5-500-2.5S	0.5	500	2.5	1000	4×31.8
19	RWM0.75-250-2.5S	0.75	200	2.5	333	4×7.07
20	RWM0.75-250-2.5SB	0.75	250	2.5	333	63.7(S)
21	RWM0.75-500-2.5SB	0.75	500	2.5	667	4×14.1
22	RWM0.75-160-2S	0.75	160	2.0	213	4×3.77
23	RWM0.75-320-3S	0.75	320	3.0	427	4×7.55
24	RWM0.75-500-3S	0.75	500	3.0	667	4×11.8
25	RWM0.75-560-3S	0.75	560	3.0	747	4×13.2
26	RWM0.375-260-4S	0.375	260	4.0	693	4×18.4
27	RWM0.375-260-4SB	0.375	260	4.0	693	73.6(5)
28	RWM0.5-260-4S	0.5	260	4.0	520	4×10.3
29	RWM0.5-260-4SB	0.5	260	4.0	520	41.4(5)
30	RWM0.5-560-4S	0.5	560	4.0	1120	4×22.3
31	RWM0.5-260-4S	0.5	260	4.0	347	4×4.6
32	RWM0.75-260-4SB	0.75	260	4.0	347	18.4(5)
33	RWM0.75-560-4S	0.75	560	4.0	747	4×9.90
34	RWM0.375-160-8S	0.375	160	8.0	427	4×5.66
35	RWM0.375-160-8SB	0.375	160	8.0	427	22.6(5)
36	RWM0.375-320-8S	0.375	320	8.0	853	4×11.3
37	RWM0.375-320-8SB	0.375	320	8.0	853	45.3(5)
38	RWM0.375-640-28S	0.375	640	8.0	1707	4×22.6
39	RWM0.5-160-8S	0.5	160	8.0	320	4×3.18
40	RWM0.5-320-8S	0.5	320	8.0	640	4×6.37
41	RWM0.5-320-8SB	0.5	320	8.0	640	25.5(5)
42	RWM0.5-640-8S	0.5	640	8.0	1280	4×12.7

Note:

1. Capacitors with end note B are allocated by 4:8:1:9:2, S for water cooling type and B for adjiustable step output.

2. Capacitors with rated output of 500 Kvar or above and rated frequency of 4 KHz or above are of copper cases. Designing series: 1foryellow copper plate or steel plate(1 omitted), 2 and 3 for aluminum plate, out pipe is sealed with silicon rubber, others for copper cases.

3. Type marking: RWM0.75-320-2S as example. R for electric heating, W for liquid dielectric, M for solid dielectric, 2 for case material, 0.75 for voltage, 320 for output, 2 for frequency, S for end note.

Elcctro capactior link:

CJ40 Single layer seaded metalized paper capacitor

CJ41 Single layer seaded metalized paper capacitor

CJ48 AC sealed metalized paper capacitor

Telephone: 0086-392-2170277, 3313798 fax: 0086-392-2172001

Zip number : 458030

Address: He nan hebi citizens born technology development Co., LTD.